Solar Conect

Pressurised Split Solar Hot Water System

Connecting you to smaller energy bills

The Lynx Solar hot water systems are so economically priced, that it is now a good time to start thinking about replacing your calentador or electric hot water heater.

A pressurised split system is where the evacuated tube collector is located separately from the tank and positioned on the roof of the property for the best possible return of the energy given by the sun. The pressurised tank can now be placed within the main structure of the building such as a cupboard or utility room. A working pump-station brings the two together.

The Lynx Solar pressurised split solar water system now gives Lynx Solar an alternative where customers cannot have or do not want a compact system; or where planning regulations in areas such as national parks do not allow this option.

Solar Conect are selling three sizes of this system:

Lynx Solar SF 150 litre

Suitable for 2-4 people with 1 bathroom and kitchen.
The complete system consists of:

• Lynx Solar SF 180/58/18 evacuated tube collector
• 150 litre stand-up stainless steel pressurised tank with 1 coil for the solar connection. An electric back-up (immersion heater)
• A Lynx Solar Pump Station: this is used to pump water through the collector returning hot water to the tank. The pump station also comes with a controller and through sensors, can activate the pump taking heat back from the tank to the collector when there is a risk of freezing
• Temperature pressure release valve
• Expansion vessel for solar loop
• Pressure gauge

Lynxsolar SF 200/250 litre

Suitable for 4-6 people with 2 bathrooms and kitchen.
The complete system consists of:

• Lynx Solar SF-1800 24/30 evacuated tube collectors
• 200/250 litre stand-up stainless mains pressure tanks with twin coils. The second coil can be used for a back-up using a gas or oil boiler. Electric back-up (immersion heater) comes as standard
• A Lynx Solar pump station: for connecting solar collector to coil in the tank to heat water. It comes with a controller which has freeze protection. This works through sensors taking heat back from the tank to the collector preventing freezing in severe conditions
• Temperature pressure release valve for safety
• Expansion vessel on the solar loop
• Pressure gauge

FEATURES FOR THE SEPARATE SOLAR SYSTEM

• Stand-up tank which takes up less space and is easy to conceal in a cupboard or utility room
• Heats water at the top of the tank quickly
• Hot water is closer to the services of the dwelling
• The evacuated tube collector, being separate, makes it easier for it to blend in with the building and surrounding environment
• The backup with electric immersion heater should be set to maintain temperature in the tank so that on cloudy days the water is not heated from cold. This also saves energy

Note: These systems come with an anode in the tank which will need replacing on a yearly basis or sooner if there are high levels of lime scale in hard water areas.
The guarantee of the pressurized tank is subject to there being filtration or a Hydroflow filter installed in hard water and high lime scale areas.
Solar Conect recommends you have a service contract either with Solar Conect or you own plumber for a yearly check-up and complete service of this product.

SPECIFICATIONS

• Outer tank material: SUS 304/2B stainless steel 0.4mm thickness
• Inner tank material: SUS 304/2B stainless steel 1.2mm thickness
• Insulating material: polyurethane 55mm thick foam
• Frame material: stainless steel for long life
• Nuts and bolts for the assembly of the frame: stainless steel
• Evacuated tubes: borosilicate glass three high-absorber coatings
• Heat pipes: high grade copper
• Temperature pressure release valve: 6Bar
• Pressure release valve for added safety: 5Bar
• Electric/Immersion heater:  1½ KW copper